Simply White® - Polyester Insulation
Simply White thermal insulation is manufactured from 100% white polyester fibre. No additives or other components are used to manufacture this thermally bonded insulation. Simply White thermal insulation is designed for use as a safe and efficient thermal insulation for homes and commercial buildings.
Benefits
- Will not deteriorate over time
- Unaffected by mould, mildew and rot
- Resistant to vermin and insect attack
- Fully recyclable
- Excellent acoustic properties
- Fire resistant ratings exceed al requirements of the New Zealand Building Code
- Not affected by water
- Guaranteed performance - certified for 50+ years duability
- Formaldehyde free.
Fire Resistance Ratings
Simply White is deemed to be a self extinguishing product and conforms to all Building Code requirements (New Zealand and Australia) as tested by AS1530 Part 3, results as follows:
AS1530 Part:
|
Ignitability (0-20) |
0 |
|
Spread of flame (0-10) |
0 |
|
Heat Evolved (0-10) |
0 |
|
Smoke developed (0-10) |
3 |
Simply White will perform as an acoustic material in a wall system, by providing a sound absorbing factor in the cavity of the wall system. Typical improvement in STC (Sounds Transmission Class) through walls is 5-6 points.
When installed in accordiance with the manufacturers instructions, Simply White will meet the relevant requirements of NZBC E3 Internal Moisture and F2 Hazardous Building Materials.
Simply White is manufactured to ISO 9001 quality standard.
Simply White is not affected by moisture.
Exposure to an atmospherre of 50C at 90% relative humidity for four (4) days shows moisture absorption by weight of less than 0.03%.
Should the product become wet, performance is restored on drying out.
 |
For more information about any of our products, please email us or use our contact form.